QR Code Alignment in the Sitelink Web Portal

Skip to content

English

Go to sitelink.ai

Before you begin:

In order to perform the alignment, you'll need to have:

At least one model uploaded to your project
Completed the QR code setup and registration step onsite

Heads up! Whenever possible, we recommend using a "coordinate first" QR alignment process, by laying out your codes in AutoCAD/Revit before going on site, or by capturing QR code positions on site using a survey station.

For more information, check out Everything You Need to Know About QR Codes, and Model Point Placement - Revit/AutoCAD/Navisworks.

QR alignment

Open your project in the 3D viewer.
Select a model you want to use for alignment.
Click the QR code tab in the left-hand menu. This will enable QR code alignment mode.
Position your first code
- As you move your code, all of your other codes will move accordingly.

💡 Tip: Choose a code in the corner of your building.

💡 Tip: Take the time to adjust your elevation at this step so you don’t need to adjust the elevation of your other codes.

Positioning your first code:

Position your second code
- As you move your second code, all of your other codes will move and rotate accordingly.

💡 Tip: Choose a code in the opposite corner of the building from your first code

Positioning your second code:

Now all of your codes should be roughly in the correct position. Begin fine-tuning each code.
- Find the next code on your QR Code list
- Click the Locate icon to zoom in
- Use the 3D gizmo to position that code
- Move to the next code on your QR Code list

💡 Tip: Click the Section Box button next to the Cancel and Save Changes buttons to section the model height to around your selected QR code.

Fine-tuning QR codes:

Zooming in to QR codes to refine the alignment:

Click the Save button once you are satisfied with your alignment.